Sensor overview - Sensors

The sensors you connect to the RJ11 port (1-Wire) or RJ45 port (RS-485) on the HW group monitoring device. The sensors provide a continuous value of, for example, -23.4 ° C or 32.7% RH. Device monitoring (SensDesk) can monitor the safe range of values and send an email or SMS alert when changing outside the value range. You can use sensors from the HW group only.

1-Wire

1-Wire UNI

RS-485

  • HTemp-485 Box2

    Combined temperature and humidity sensor for vertical wall mounting indoor usage. Communication over RS-485 bus with a simple communication protocol. The sensor can be used separately but it was designed to be connected with thePoseidon family units.

  • HTemp-485 T3411

    Temperature and humidity sensor HTemp-485 T3411. IP40 allows outdoor usage. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be therefore used alone or with Poseidon units.

  • HTemp-485 T3419

    Temperature and humidity sensor HTemp-485 T3419. IP40 shielding allows outdoor usage. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be therefore used alone or with Poseidon units.

  • PHTemp-485 T7410

    Temperature, humidity, barometric pressure and dew point temperature sensors. For indoor use. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be used alone, or with Poseidon units.

  • Temp-485 Box2

    Temperature sensor for indoor usage at RS-485 bus with a simple communication protocol. The sensor can be used separately but is designed for connection to the Poseidon measuring unit and transmit temperature over SNMP, WEB

  • Temp-485-Pt100 Box2

    Temp-485-Pt100 Box2

  • Temp-485-Pt100 Cable3

    Temp-485-Pt100 Cable3

  • Temp-485-Pt100 Frost2

    Temp-485-Pt100 Frost2

WLD

PT100/1000 Probe