You are here

Poseidon2 / Damocles2

  • Fix: reading Modbus/TCP registers with counters => convert to 2x 16bit (32bit value in sum)
  • Mod. Disabled TCP setup (telnet) in default configuration

Subscribe for
software releases

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.
Poseidon2 / Damocles23.4.3.(3)

The changes in default configuration is affected the backward compatibility.

  • Fix: reading Modbus/TCP registers with counters => convert to 2x 16bit (32bit value in sum)
  • Mod. Disabled TCP setup (telnet) in default configuration
VersionRelease dateFile sizeDownload
3.4.3.(3)04/05/2018 - 07:09742.07 KB
Poseidon2 / Damocles23.4.2.(2)
  • Fix: SNMP - If Community was not selected, the device responded to a request without a Community. Now Community must be selected
  • Fix - Fixed macro statement in MQTT
  • Fix: WWW Homepage - Fixed displaing "On if alarm on" in the Outputs view

 

 

VersionRelease dateFile sizeDownload
3.4.2.(2)03/14/2018 - 15:12742.16 KB
Poseidon2 / Damocles23.3.15.(15)

MOD: When Alarm is finished on one or more inputs or sensor stop in same time, SMS message has information about all finished Alarms

VersionRelease dateFile sizeDownload
3.3.15.(15)01/30/2018 - 07:10738.08 KB
Poseidon2 / Damocles23.3.14.(14)
  • Fix: IPv4 filter
  • Add: Counter state to Push message
VersionRelease dateFile sizeDownload
3.3.14.(14)01/03/2018 - 17:40738.04 KB
Poseidon2 / Damocles23.3.13.(13)

Fix: Read state of inputs after Power-UP

VersionRelease dateFile sizeDownload
3.3.13.(13)12/14/2017 - 18:35737.96 KB
Poseidon2 / Damocles23.3.12.(12)

The update to new FW version will erase the counter status and the HTTPs certificates imported previously!

  • FIX: XML/XSL transformation in Internet Explorer and Edge
  • ADD: Input`s Counters in Poseidon2 family - all devices
  • MOD: Totally redesigned work with inputs Counters in Poseidon2 and Damocles2 devices
  • FIX: Ajax on Input`s page for reload input values
  • FIX: Changes name of state for inputs with ID > 154 from Unlock/Lock to On/Off
  • FIX: Data saving on General Setup page
  • Add: Enable download SSL private key
  • FIX: Modification od memory map - IMPORTANT! - after upgrade you will lose data about counters and SSL certificates! Read Condition for this release!
  • FIX:  Data saving for Hysteresis values
  • MOD: Totally redesigned upgrade of firmware. Added checksum do every file in filesystem, added CRC
  • MOD: Extension reload timeout after firmware upgrade to 45s
  • FIX: Changing device name from HWg Config  
  • Add: Added possibility change TCP port for Syslog on General Setup page
     
VersionRelease dateFile sizeDownload
3.3.12.(12)11/29/2017 - 12:30737.93 KB
Poseidon2 / Damocles23.3.3.(3)

Add: Generate self signed certificate and key
MOD: Internal Watchdog function

VersionRelease dateFile sizeDownload
3.3.3.(3)08/21/2017 - 09:47732.99 KB
Poseidon2 / Damocles23.3.1.(1)
  • NEW: Syslog settings for each sensor or input
  • MOD. Syslog message  format
VersionRelease dateFile sizeDownload
3.3.1.(1)06/26/2017 - 14:26743.5 KB
Poseidon2 / Damocles23.2.11.(11)
  • FIX: ModBus/TCP
  • MOD: Length hostname increased to 32 characters
VersionRelease dateFile sizeDownload
3.2.11.(11)04/05/2017 - 07:40709.2 KB
Poseidon2 / Damocles23.2.7.(7)
  • Fix: Saving hostname
  • Add: User defined Topic in MQTT
VersionRelease dateFile sizeDownload
3.2.7.(7)03/16/2017 - 10:24709.24 KB
Poseidon2 / Damocles23.2.5.(5)

Fix: Saving variables with index (sensors, DI, DO)
 

VersionRelease dateFile sizeDownload
3.2.5.(5)02/06/2017 - 13:16677.49 KB
Poseidon2 / Damocles23.2.4.(4)

Fix: Enable/Disable Modbus/TCP

VersionRelease dateFile sizeDownload
3.2.4.(4)02/03/2017 - 11:06677.51 KB
Poseidon2 / Damocles23.2.3.(3)
  • FIX: Controll Output1 from Sensdesk
  • MOD: NEW SSL/TLS driver
VersionRelease dateFile sizeDownload
3.2.3.(3)01/31/2017 - 13:28677.45 KB
Poseidon2 / Damocles23.0.11.(11)
  • Fix: freezing after pressing F5 and opening many connection at once.
  • MOD: Faster loading WWW (5 times faster)
  • Add:  support for IPV6 in to UDP Setup.
VersionRelease dateFile sizeDownload
3.0.11.(11)11/08/2016 - 11:42632.96 KB
Poseidon2 / Damocles23.0.10.(10)
  • Fix: minor issues on WWW pages
  • Fix: WWW pages for browsers Opera and Edge
  • Fix: Communication monitor on Inputs page
  • Mod: Disabled outputs are hidden
VersionRelease dateFile sizeDownload
3.0.10.(10)11/04/2016 - 11:10632.64 KB
Poseidon2 / Damocles23.0.9.(9)
  • Mod: Unified firmware for Poseidon2 and Damocles2 – common functions for both devices
  • Add: Support of HTTPS
  • Add: Support of MQTT
  • Add: Support of IPv6
  • Add: New bookmark "Security" where you can find security functions and manage the HTTPS certificates. The security function such as setting the filter for IP addresses, names and passwords, newly has been added the function to manage the HTTPS certificates
  • Add: 5 positions  for IP Access filter
  • Add: Control of Relay DO (Digital Outputs) from SensDesk portal
  • Add: Virtual outputs to control the outputs from Poseidon2 to Damocles2 and vice versa (Box2Box), the communication goes over TCP/IP protocol and all functions, conditions and characters of physical outputs can be applied.
  • Mod: The extension of the names of binary inputs up to 32 characters
  • Mod: Identical web interface and graphics, easier orientation, reverse compatibility
  • Mod: Unified MIB and XML for both devices – easier implementation into 3rd party systems.
  • Mod: New design of WWW pages - Must refresh pages CTRL+F5
VersionRelease dateFile sizeDownload
3.0.9.(9)11/01/2016 - 14:39632.64 KB
Poseidon2 / Damocles21.4.8.(8)
  • Add: The number of assigned 1-Wire port added. Function +XML (FW 1.4.7 XML Tag <PortId>) + SNMP (OID 1.3.6.1.4.1.21796.3.3.3.1.11, name sensPortID)
VersionRelease dateFile sizeDownload
1.4.8.(8)03/29/2016 - 15:50599.64 KB
Poseidon2 / Damocles21.4.6.(6)
  • Fix: Sending SMS alarms for Humidity sensors
VersionRelease dateFile sizeDownload
1.4.6.(6)02/01/2016 - 10:32599.27 KB
Poseidon2 / Damocles21.4.5.(5)
  • Fix: DHCP renew -  Automatic restart of the device if different IP address is assigned by DHCP server
VersionRelease dateFile sizeDownload
1.4.5.(5)02/17/2016 - 14:20599.29 KB
Poseidon2 / Damocles21.4.4.(4)

Fix: DHCP Lease

VersionRelease dateFile sizeDownload
1.4.4.(4)01/26/2016 - 13:38600.54 KB
Poseidon2 / Damocles21.4.1.(1)

Fix: Box2Box mode

VersionRelease dateFile sizeDownload
1.4.1.(1)12/10/2015 - 14:46595.76 KB
Poseidon2 / Damocles21.3.15.(15)
  • FIX: Ringout When the Alarm begin
  • Add: Ringout when the Test button is pressed
  • FIX:  Saving the Sync period and the Report Log Period in the Log & Time menu
  • Fix: Set Default Config from WWW – Clear all the sensors
  • ADD: Binary (relay) Output state in HWg-PUSH protocol (Sensdesk)
VersionRelease dateFile sizeDownload
1.3.15.(15)11/24/2015 - 10:57596.77 KB
Poseidon2 / Damocles21.3.14.(14)
  • Add: Time zone in minutes
  • Fix: TLS over GMX
VersionRelease dateFile sizeDownload
1.3.14.(14)08/24/2015 - 14:45595.73 KB
Poseidon2 / Damocles21.3.10.(10)

FIX: SNMP - Socket client applications should pass zero in initialization
FIX: HTTP - Variable "securityName" should be protected as well
IMP: VER_NUM_STR (msg.h) used as macro with parameters

VersionRelease dateFile sizeDownload
1.3.10.(10)06/11/2015 - 16:19639.97 KB
Poseidon2 / Damocles21.3.9.(9)
  • Add: an adjustable synchronization period of time on 1/10/24 hours. Bypasses the need for constant communication preventing the failure of some of switches
  • Mod: Modified behavior of DHCP client. Now it repeating request for allocation of IP addresses after 20, 60, 360, and 900 seconds. Solution for situation when the network boot up before the DHCP server.
VersionRelease dateFile sizeDownload
1.3.9.(9)05/22/2015 - 19:59598.6 KB
Poseidon2 / Damocles21.3.8.(8)
  • Add: Modbus/TCP Settings page - Modmus/TCP Enable/Disable and ModBus/TCP port settings
  • Add: Detailed information on System page (Product Name, Serial Number, MAC Address, Build of firmware, Compiled time)
  • Add: Update operating system
  • Fix: Temperature Unit in 1-Wire UNI sensors (Converter 2xPt100 1W-UNI)
  • Fix: Hide passwords on Portal and General Settings page
  • Fix: Password Generation security key (AES128) in SNMPv3
VersionRelease dateFile sizeDownload
1.3.8.(8)05/05/2015 - 09:23639.78 KB
Poseidon2 / Damocles21.3.4.(4)
  • Speed-up response of SNMP
  • Fix: added support for non-standard agents SNMPv3 (zero msgAuthoritativeEngineBoots and msgAuthoritativeEngineTime)
VersionRelease dateFile sizeDownload
1.3.4.(4)03/26/2015 - 08:44634.53 KB
Poseidon2 / Damocles21.3.2.(2)
  • Add: Pulse timer for Outputs
  • Add: SNMPv3
VersionRelease dateFile sizeDownload
1.3.2.(2)03/03/2015 - 05:40655.45 KB
Poseidon2 / Damocles21.2.11.(11)

Fix: Sending of false values after power up eliminated

VersionRelease dateFile sizeDownload
1.2.11.(11)07/16/2014 - 14:32626.25 KB
Poseidon2 / Damocles21.2.10.(10)

Fix: Monitoring of values below zero with Converter 2xPt100 1-Wire UNI

VersionRelease dateFile sizeDownload
1.2.10.(10)07/16/2014 - 14:31625.24 KB
Poseidon2 / Damocles21.2.7.(7)

Fix: Periodic LOG  file format

VersionRelease dateFile sizeDownload
1.2.7.(7)06/24/2014 - 09:47624.45 KB
Poseidon2 / Damocles21.2.5.(5)

Fix: Changed Relay1 a Relay2 Output

VersionRelease dateFile sizeDownload
1.2.5.(5)06/13/2014 - 09:34619.5 KB
Poseidon2 / Damocles21.2.3.(3)

Fix: Problem with humidity sensors after reconnection fixed.

VersionRelease dateFile sizeDownload
1.2.3.(3)05/12/2014 - 12:32619.05 KB
Poseidon2 / Damocles21.2.2.(2)

Add: option to set the internal temperature units

VersionRelease dateFile sizeDownload
1.2.2.(2)04/28/2014 - 12:54617.76 KB
Poseidon2 / Damocles21.2.1.(1)

Add: Relay control via SNMP Traps

VersionRelease dateFile sizeDownload
1.2.1.(1)04/16/2014 - 15:28606.58 KB
Poseidon2 / Damocles21.2.0.

Fix: Sending SMS over netGSM (HWg-SMS-GW or other Poseidon with GSM modem)

VersionRelease dateFile sizeDownload
1.2.0.03/19/2014 - 16:51605.38 KB
Poseidon2 / Damocles21.1.18.(18)

Fix parsing of the length in SNMP packet

VersionRelease dateFile sizeDownload
1.1.18.(18)03/10/2014 - 13:52605.42 KB
Poseidon2 / Damocles21.1.17.(17)

Fix: Fahrenheit vs. Celsius in Safe Range

VersionRelease dateFile sizeDownload
1.1.17.(17)02/25/2014 - 09:59605.43 KB
Poseidon2 / Damocles21.1.16.(16)

New: Tag units in Values.xml

VersionRelease dateFile sizeDownload
1.1.16.(16)02/21/2014 - 14:59597.42 KB
Poseidon2 / Damocles21.1.15.(15)
  • Fix: Temperature Units in HWg-PUSH protocol
  • New: New WWW design
  • New: New button "Set Default Config" in WWW 
VersionRelease dateFile sizeDownload
1.1.15.(15)02/19/2014 - 11:08597.47 KB
Poseidon2 / Damocles21.1.10.(10)
Replaced incorrectly compiled version 1.1.9.
For upgrade, enter the page "http://poseidon2_address/upload"
VersionRelease dateFile sizeDownload
1.1.10.(10)11/26/2013 - 13:04821.18 KB
Poseidon2 / Damocles21.1.9.(9)
Fix data logging in Poseidon 4002 models Add full support HWg Push protocol Move Portal configurations form General Setup to Portal www page Add Manual push button, Portal Message window and autopush options to Portal WWW page Fix values data in spilog.bin endian order Set default GSM modem T35i Add SSL/TLS protocol to email client Fix Enable/Disable DHCP procedure.
VersionRelease dateFile sizeDownload
1.1.9.(9)11/21/2013 - 14:39350.66 KB
Poseidon2 / Damocles21.0.15.(15)
Fix: binary inputs order Fix: inputs and outputs naming
VersionRelease dateFile sizeDownload
1.0.15.(15)09/16/2013 - 12:59689.03 KB
Poseidon2 / Damocles21.0.14.(14)
First Public release
VersionRelease dateFile sizeDownload
1.0.14.(14)09/10/2013 - 14:50689.06 KB
Download type: